Prefer English? We will keep this page context and only switch if you want.
Key card switch accessories for the 86 box install: face plates, 86 box mounting bases, contactors for high-load HVAC, power supplies, and RS485 hubs. Choose accessories to complete any 86 box key card switch project.
Key card switch accessories are the components that complete a guest room power control installation in a standard 86 box. While a key card switch provides the detection and logic, the full project needs a matching face plate, an 86 box mounting base, and often a contactor, power supply, or RS485 hub to handle high loads and centralized control. Ordering these accessories with the switch keeps one consistent brand, one set of certifications, and one supplier — so an 86 box key card switch project is specified, bought, and installed as a single package rather than a patchwork of parts.
The visible finish of any 86 box key card switch is the face plate. Our flush white PVC face plates match the switch electronics and provide a clean, low-profile appearance in guest rooms, with custom OEM color and logo available for branded projects. The 86 box mounting base is engineered to screw into standard junction boxes, so new-build teams fit it in minutes and retrofit teams replace an existing switch without reworking the wall box. Matching the face plate and base to the switch means one uniform look across lighting, socket, and power control points in the room.
A contactor is the accessory that lets a key card switch handle large loads safely. When a guest room circuit includes high-power equipment such as a water heater or a large air handler, the switch's dry contact output drives a matched contactor instead of switching the load directly through the relay. The contactor carries the heavy current, while the key card switch supplies the control signal. This arrangement keeps switch contacts cool, extends service life, and is the recommended configuration for 16A-and-above HVAC and water heater circuits. We help you specify the correct contactor rating for each load.
Stable power is the foundation of reliable guest room controls. Key card switch accessories include line and DC power supply options matched to the switch and hub electronics. Line-powered units operate directly on AC 100-240V, 50/60Hz, while regulated DC supplies ensure a clean, stable feed for switch electronics across a floor or wing. Correctly matched power supplies prevent brownout and noise issues that can cause intermittent switching, and they support the battery-preserving low-power operation of wireless switch configurations.
For hotels that want to coordinate power control across many rooms, an RS485 hub is the accessory that connects the dots. A multi-port RS485 hub links a number of key card switch units to a single guest room control bus, letting a panel or building management system read switch states and coordinate room-level control without per-room network wiring. This accessory provides a clean upgrade path: individual switch units can be deployed now and later connected through hubs as the property centralizes its energy management.
All key card switch accessories are designed to work with our key card switch product line. Face plates, 86 box bases, contactors, power supplies, and RS485 hubs are specified to match the mechanical and electrical interface of each switch, so ordering is straightforward. This page links the full product range: contactless RFID key card switches, insert-card energy saving switches, high-load door card power switches, and wireless retrofit switches all draw on the same accessory family. Working alongside any door lock brand and accepting standard guest cards, the completed 86 box key card switch installation remains independent of lock and network suppliers.
As an OEM/ODM supplier, we customize key card switch accessories to project and brand requirements: face plate color and logo, contactor ratings, power supply specifications, and RS485 hub port counts. Minimum order quantity is 50 pcs with samples available in 3-4 days and mass production in 5-7 days. We ship worldwide on FOB Shenzhen, CIF, DDP, or EXW terms and support T/T, L/C, and Trade Assurance payment, with every component carrying CE and RoHS compliance.
Send us your room count and a bill of materials for the key card switches you plan to install, and we will provide a matched accessory list — face plates, 86 box bases, contactor ratings, power supplies, and RS485 hub sizing — with a per-room cost and sample kit plan within 24 business hours.
Every accessory needed to finish a key card switch installation in a standard 86 box — face plates, mounting bases, contactors, power supplies, and RS485 hubs — can be specified as one package with consistent branding and certification.
Flush white PC face plates and 86 box mounting bases match the switch electronics, so a retrofit or new-build install keeps a clean, uniform guest-facing appearance across all room controls.
A correctly specified contactor lets a key card switch cut power to high-load HVAC and water heaters without overloading the switch relay, protecting equipment and extending service life.
Line and DC power supply options are matched to the switch and hub, providing stable voltage so the control electronics run reliably across a floor or wing.
Multi-port RS485 hubs connect many switch units to a single guest room control bus, giving hotels a clean upgrade path to centralized power control without per-room network work.
| Face Plate | Flush white PC, custom OEM color and logo |
|---|---|
| Mounting | Standard 86-box base, screw-fit |
| Contactor | Matched rating for HVAC and water heater loads |
| Power Supply | AC 100-240V input, regulated DC output |
| RS485 Hub | Multi-port bus hub for switch coordination |
| Input Voltage | AC 100-240V, 50 60Hz |
| Contact Output | Dry contact |
| Relay Rating | 10A 16A resistive, 8A inductive |
| Operating Temperature | 20°C to +55°C |
| IP Rating | IP20 |
| Dimensions | 86mm x 86mm |
| Housing | Fire-retardant PC, white or custom color |
Compare the 3 protocols, check hotel-specific case studies, and download the installation guide
Guest-room-style key card power switching for serviced apartments, student accommodation, homestays, and apartment hotels, configured to each project.
It supports the same product context: Hotel Energy Saving Switch — Insert-Card Guest Room Power Control, Wireless Key Card Switch — Battery or Bus Power for Retrofitting Hotels.
RFID key card switch with contactless 13.56MHz detection. Guest simply taps a card on the reader area to power the room, no insertion slot needed. Works alongside hotel door locks. CE RoHS. OEM/ODM supplier.
This page already points to it as the next recommended reference.
Hotel energy saving switch that powers a room on card insertion and cuts power after a card-removal delay, pairing with HVAC to stop empty-room waste. 220V AC, 10A-16A, RS485 or dry contact. CE RoHS. OEM/ODM supplier.
This page already points to it as the next recommended reference.
Hotel door card power switch, the classic insert-card-and-power, card-removal delay cut-off control. 16A high load handling, drives contactors for HVAC and water heaters. 220V AC. CE RoHS. OEM/ODM supplier.
This page already points to it as the next recommended reference.
A hotel key card switch installation guide for electricians and maintenance teams covering box prep, wiring, relay connection, card test, delay-off timing, and commissioning.
This page already points to it as the next recommended reference.
A hotel key card switch is a wall device that powers a guest room when a card is inserted and cuts it when removed, typically saving 25–40% of room…
This page already points to it as the next recommended reference.
Leave the application, quantity, and target market information so the sales team can respond with a practical next step.
Send your drawings, target quantity, and timeline. Our sales engineering team will respond within 24 business hours with a practical next step, a quote, or a sample plan.